Transmits the data collected by a CarChip Fleet Pro to a Wireless Base Station. You’ll need one per vehicle. Before installation, complete a few simple steps using our Configuration Cable and Fleet Management Software. Then, plug the module into the CarChip data logger using the GPS/Wireless Interface Module. Mounts in window of vehicle using the included Velcro® strips or doublesided foam tape.

The Base Station for Wireless Download System connects to a computer running Fleet Management Software 3.7 or later using a USB connection. It communicates with all the Wireless On-Board Modules installed in your fleet and moves the data from the CarChip device to the FMS database. Using FMS, this operation can be performed daily for all the vehicles in your fleet, or only for selected vehicles. You can also initiate a manual download from selected vehicles or your whole fleet.

Product Dimensions:	2.50" x 1.75" x 0.75" (64 mm x 45 mm x 20 mm)
Operating Temperature:	-40°F to +176°F (-40°C to +80°C)
Input Power:	3.3 Vdc
Typical Standby Current:	10mA
Typical Transmit Current:	270mA
Wireless Transmitter Specifications
Frequency:	ISM 2.4GHz
Protocol:	IEEE 805.15.4
Channels:	12
Line of Sight Range:	600' (200 m)
Output Power:	60mW (18dBm) (US); 10mW (10dBm) (Europe)
Receiver Sensitivity:	-100dBM (1% packet error rate)
Agency Certifications:	FCC, IC, CE

"When my drivers saw how they were breaking the law, it woke some of them up. CarChip has helped us to remind them that sometimes you forget how fast you are really driving."
Roadside Assistance, Arizona

"It's not an exaggeration to say that for this project, CarChip provided a more reliable and cost-effective means to obtain vehicle operating data than any other approaches that we know."
Air Pollution Researcher, California

"CarChip is a simple tool every fleet manager can use. Ever since we began using it and informing drivers that their vehicle "may" have a vehicle data recorder installed, citizen complaints have decreased."
University Fleet Manager, Nebraska

Click on a link to open the PDF.
Safety & Insurance Savings Black Tie Transportation Pleasanton, CA First Alarm Aptos, CA Repair Prevention Battery Assist/ALJO Enterprises Tucson, AZ Driver Monitoring University of Nebraska Lincoln, NE Anchor Pest Control Sonora, CA	Instruction Manual Specification Sheet

	CarChip® Fleet Pro	Simple installation, loads of information. With CarChip Fleet Pro, installation is as simple as “plug & drive.” Just plug the tiny data logger into the on-board diagnostics port and begin recording trip details immediately.
	#8246
	GPS/Wireless Interface Module	Connects the Wireless On-Board Module to your CarChip Fleet Pro data logger.
	#8251
	Wireless Base Station	Receives data from the Wireless On-Board Module and passes it on to the Fleet Management Software. One Base Station per parking lot or office. Larger parking lots may require more than one Base Station.
	#8130
	Configuration Cable	For Wireless On-Board Module. Connects the Wireless On-Board Module to the USB port on your PC for configuration before initial use. One per office or fleet location.
	#8131